Torque Pant

Jet Black / 32/32

$140.00

$140.00 $140.00

PREORDER

Torque Pant

$140.00

$140.00 $140.00

ColorJet Black

Build: Lean

Measure	XS	S	M	L	XL	2XL

Note on Short Sizes: Selected gear is available in "Short" versions. These maintain the body measurements above but come with a 3 inch shorter inner leg.

Measure your body, not the gear

Grab a tape and measure over your base layers to get an accurate starting point. These specs refer to your actual body size, not the dimensions of the garments. If you find yourself caught between two sizes, think about how you ride. Size up for a looser fit and extra room for layers, or size down for a tighter, technical feel.

Sizing Format: Waist / Inseam (for example, 34/32 means 34" recommended waist fit and 32" inseam length).

Waist

Body measurements around your natural waistline and seat, plus flat waistband garment width.

Waist	W30	W32	W34	W36	W38	W40

Inseam

Inner leg length measured from crotch to floor, along with suggested user height range.

Inseam	L30	L32	L34

Use your current favorite pant as a guide

The most reliable shortcut to your size is to take your favorite pair of non-stretch jeans or work pants, button them, and lay them flat on a table. Measure straight across the top edge of the waistband (Garment 1/2 waist) and match it against the table above. For length, measure from the crotch fork down the inner seam to the bottom hem.

Sizing Format: US (Men's) / EU (Men's). If you are between sizes or plan to use thick thermal socks, we recommend sizing up.

Boots Sizing Chart

Find your boot size by matching your maximum foot length with the chart below.

US (Men's)	EU (Men's)	Max Foot Length	Inside Length

How to measure your feet

Stand on a sheet of paper with your riding or work socks on, with your heel firmly against a wall. Mark the tip of your longest toe and measure the distance straight back to the wall. Match that measurement against Max Foot Length in the chart above.

Max Foot Length: Our recommended max foot length that will fit comfortably in that size.

Inside Length: Total interior boot length with built-in clearance for movement, toe wiggle room, boot lining, and thicker socks.

How to measure

Length / Height

Your full height, boots off, back against a wall.

Chest

The widest circumference of your chest, directly beneath the armpits.

Waist

Your natural waistline, right where you normally bend.

Hip & Seat

The widest part of your seat with your heels together.

Inner Leg / Inseam

From the crotch straight down to the floor or ankle bone without boots on.

Arm

From the edge of your shoulder bone straight down to the wrist bone.

Hand

Width across knuckles with your palm flat, and length from wrist to tip of middle finger.

Foot Length

From the back of your heel to the tip of your longest toe while standing upright.

The Builds

Relaxed

Built with a generous cut for the riders and workers who like to layer up or prefer that loose feel. It is a "no-pinch" zone designed for unrestricted mobility when wrestling equipment, bending, or wrenching.

Pro Tip: If you prefer a trimmer silhouette around town, size down.

Regular

The middle ground. Follows the natural contours of your body without being restrictive or excessively baggy. A versatile, honest cut that gets the job done on and off the machine.

Pro Tip: Check your tape measurements and pick your exact size.

Lean

A more streamlined, closer cut designed to stay out of your way. We remove excess bulk so nothing snags or slows you down, keeping a clean profile with full range of motion.

Pro Tip: If you like roomier thigh space or wear thick thermal liners, consider sizing up.

Expected delivery: February 15

The Essentials

The Torque Pant is purpose-built for carpenters, contractors, and tradespeople who need full mobility on the job site without sacrificing raw durability. We built it from heavy-duty 300g/m² 4-way stretch nylon with Cordura reinforcements right where you need them most. It is a no-compromise work pant designed to move with you through every squat, climb, and double shift.

The Nitty-Gritty

If you’ve ever spent a ten-hour day framing, crawling under subfloors, or stepping up onto scaffolding in stiff, heavy canvas pants, you know the drill. Workwear shouldn't pinch or fight you every time you bend down to grab a board. For the Torque Pant, we used a heavy 300g/m² dobby nylon with 7% Spandex, giving you full 4-way stretch that feels like performance gear while standing up to real-world job site abuse.

We know the workday demands flexibility in more ways than one. That’s why we built removable Cordura utility pockets on the hips, snap them on when you're loaded up with fasteners and hand tools, and pop them off when it’s time to hop in the truck or head to the lumber yard. The kneepad pockets feature CORDURA-Stretch reinforcement so you can drop onto concrete or rough framing without tearing up your knees or feeling bound up. Every utility detail is laid out for real work: a dedicated multi-purpose knife pocket, side hammer loop, cargo pocket with a quick magnet lid and zipper, secure phone storage, and an aluminum D-ring at the waist for keys or clip-on gear.

Reinforced seams, Cordura edge-binding on high-wear pocket edges, and adjustable leg hems keep these pants holding strong for the long haul while keeping sawdust and gravel out of your boots. It’s honest, hardworking utility built to keep up from sunup to sundown.

Under The Hood

Main Fabric: 300g/m² 4-Way Stretch Dobby (93% Recycled Nylon, 7% Spandex)
Reinforcements: CORDURA®-Stretch kneepad pockets, plus Cordura® reinforced pocket edges and leg hems
Utility Pockets: Removable Cordura® hip utility pockets for tools and hardware
Storage Layout: Cargo pocket with magnetic lid and zipper, dedicated phone storage, and multi-purpose knife pocket
Tool Attachments: Heavy-duty side hammer loop and sturdy aluminum D-ring at waist
Construction & Fit: Heavy-duty reinforced seams and adjustable leg hems to seal out dirt and debris
Trims & Branding: Branded webbing, molded rubber patch, woven MG label, and embroidered CB belt loop logo
Visibility & Style: Carbon reflective leg print, leg style print, and big print detail inside waist

Materials & Compliance

Fabric contains 93% Recycled Nylon for reduced environmental impact.
This product uses a PFAS-free DWR (Durable Water Repellent) finish.
Warning for California residents. Read more about Proposition 65 here.

What We're Built On

We're a small crew from the north, started by a few folks who believe in building honest gear for our community.

"Every piece of apparel we sell helps us put money back where it matters: into the small towns and rural communities where we all live and ride."

Thanks for being a part of it.

Owned by The Community

Proudly backed by locals and riders, not big-money investors

Honest, Purpose-Built Gear

Durable equipment that simply works, no frills attached

A Purchase with a Purpose

Every piece of gear sold helps us invest back into our communities

On When You Need 'Em, Off When You Don't

Hanging holster pockets are a lifesaver when you're loaded down with screws, tape, and pliers on the job site. But can be a pain in the rear when you hop into the truck or head into town. We built these utility pockets to lock in solid when you're working hard, and snap right off in seconds when you're off the clock or tossing the pants in the wash.

Freedom to Bend, Toughness to Last

Work pants doesn't need to feel like stiff cardboard when you squat down to grab a tool or climb onto a flatbed. We blended heavy-duty stretch directly into the canvas so you get full freedom of movement without giving up an ounce of durability. You get all the flex you need to reach, crouch, and move, wrapped in a fabric that won't blow out when the work gets heavy.

Save Your Knees for the Weekend

Crawling around under a trailer, laying decking, or kneeling on cold shop concrete will wreck your joints fast. We built bottom-loading kneepad pockets right where you need them, so you can slide your favorite foam pads in when it's time to get low, and slip them out when the dirty work is done. Your future self will thank you.

No Blowouts Allowed

There's nothing worse than splitting your pants right down the middle when you're lifting a heavy beam or stepping up onto a rig. We triple-stitched the main seam lines and bar-tacked every high-stress point so you can strain, twist, and work all day long with zero fear of an embarrassing tear.