Clamp Glove

Clamp Glove

Forged Iron / XS
$130.00
$130.00 $130.00
Skip to product information
PREORDER
Clamp Glove
  • Clamp Glove
  • Clamp Glove
  • Clamp Glove
  • Clamp Glove
  • Clamp Glove
  • Clamp Glove
  • Clamp Glove
  • Clamp Glove
  • Clamp Glove
  • Clamp Glove
Clamp Glove

Clamp Glove

$130.00
$130.00 $130.00
ColorForged Iron
Size
Build: Regular

Size Guide

Measure XSSMLXL2XL
Note on Short Sizes: Selected gear is available in "Short" versions. These maintain the body measurements above but come with a 3 inch shorter inner leg.
Measure your body, not the gear

Grab a tape and measure over your base layers to get an accurate starting point. These specs refer to your actual body size, not the dimensions of the garments. If you find yourself caught between two sizes, think about how you ride. Size up for a looser fit and extra room for layers, or size down for a tighter, technical feel.

Sizing Format: Waist / Inseam (for example, 34/32 means 34" recommended waist fit and 32" inseam length).

Waist

Body measurements around your natural waistline and seat, plus flat waistband garment width.

Waist W30W32W34W36W38W40

Inseam

Inner leg length measured from crotch to floor, along with suggested user height range.

Inseam L30L32L34
Use your current favorite pant as a guide

The most reliable shortcut to your size is to take your favorite pair of non-stretch jeans or work pants, button them, and lay them flat on a table. Measure straight across the top edge of the waistband (Garment 1/2 waist) and match it against the table above. For length, measure from the crotch fork down the inner seam to the bottom hem.

Sizing Format: US (Men's) / EU (Men's). If you are between sizes or plan to use thick thermal socks, we recommend sizing up.

Boots Sizing Chart

Find your boot size by matching your maximum foot length with the chart below.

US (Men's) EU (Men's) Max Foot Length Inside Length
How to measure your feet

Stand on a sheet of paper with your riding or work socks on, with your heel firmly against a wall. Mark the tip of your longest toe and measure the distance straight back to the wall. Match that measurement against Max Foot Length in the chart above.

Max Foot Length: Our recommended max foot length that will fit comfortably in that size.

Inside Length: Total interior boot length with built-in clearance for movement, toe wiggle room, boot lining, and thicker socks.

How to measure

Length / Height

Your full height, boots off, back against a wall.

Chest

The widest circumference of your chest, directly beneath the armpits.

Waist

Your natural waistline, right where you normally bend.

Hip & Seat

The widest part of your seat with your heels together.

Inner Leg / Inseam

From the crotch straight down to the floor or ankle bone without boots on.

Arm

From the edge of your shoulder bone straight down to the wrist bone.

Hand

Width across knuckles with your palm flat, and length from wrist to tip of middle finger.

Foot Length

From the back of your heel to the tip of your longest toe while standing upright.

The Builds

Relaxed

Built with a generous cut for the riders and workers who like to layer up or prefer that loose feel. It is a "no-pinch" zone designed for unrestricted mobility when wrestling equipment, bending, or wrenching.

Pro Tip: If you prefer a trimmer silhouette around town, size down.
Regular

The middle ground. Follows the natural contours of your body without being restrictive or excessively baggy. A versatile, honest cut that gets the job done on and off the machine.

Pro Tip: Check your tape measurements and pick your exact size.
Lean

A more streamlined, closer cut designed to stay out of your way. We remove excess bulk so nothing snags or slows you down, keeping a clean profile with full range of motion.

Pro Tip: If you like roomier thigh space or wear thick thermal liners, consider sizing up.
Honest. Durable. Purpose-built.

Expected delivery: October

Bulk Order Table

+
The Essentials

The Clamp Glove is for the rider who needs protection from the cold without losing that essential connection to the machine. We built it with a full leather palm and added 100g of thin, high-performing insulation to the backhand to keep the bite out of the wind. It is a rugged, high-performance glove designed for long days out in the deep snow.

The Nitty-Gritty

Finding the right balance between staying warm and keeping a good feel for the bars is always a challenge. For the Clamp, we used a full goat leather palm without any seams to ensure you have a solid, direct connection to your handles. By putting the 100g thin, high-performing insulation and fleece pile only on the backhand, we kept the layer thickness in the palm to a bare minimum. This ensures your dexterity stays high while your knuckles stay protected from the freezing air.

The construction is meant for the long haul. We used Cordura Nylon for the shell and wrapped the fingertips in leather for extra durability where it counts. The Waterproof Sympatex insert keeps the moisture out when you are digging out a buddy or scouting a line in the wet snow. With embossed leather knuckles and a secure Cordura-covered neoprene cuff, this glove feels like a well-made tool that is ready for whatever the mountain throws at you. It is a timeless, durable piece of gear that is all about keeping you comfortable so you can stay out longer and enjoy the ride.

Under The Hood
  • Main Fabric: Cordura® Nylon and high-quality goat leather
  • Waterproofing: Integrated high-performance Waterproof Sympatex® insert
  • Backhand Insulation: 100g thin, high-performing insulation and fleece pile for warmth without bulk
  • Palm: Full goat leather palm without seams for maximum bar feel
  • Finger Protection: Full leather fingers and knuckles with embossed branding
  • Fingertips: Leather wrap-around fingertips for added longevity
  • Reinforcement: Extra leather reinforcement between the pointer finger and thumb
  • Cuff: Cordura® covered neoprene cuff with a secure velcro closure
  • Interior Lining: Fleece-lined palm for comfort and moisture management
  • Graphics: Embossed branding over knuckles and embroidery on velcro strap
Materials & Compliance
What We're Built On

We're a small crew from the north, started by a few folks who believe in building honest gear for our community.

"Every piece of apparel we sell helps us put money back where it matters: into the small towns and rural communities where we all live and ride."

Thanks for being a part of it.

Owned by The Community

Proudly backed by locals and riders, not big-money investors

Honest, Purpose-Built Gear

Durable equipment that simply works, no frills attached

A Purchase with a Purpose

Every piece of gear sold helps us invest back into our communities

The Perfect Grip

A good connection to your machine is everything. We use high-quality goat leather in our palms and keep them seam-free where it counts. It’s tough enough to last for seasons and soft enough to give you a natural grip that synthetic materials just can't match.

Bone Dry, No Matter What

We don't gamble with the weather. The Sympatex 45k membrane is top-of-the-line tech that keeps the wet stuff out while breathing harder the more you work. It’s windproof, waterproof, and built to handle the kind of days where most folks stay inside by the fire.

MORE GEAR

Honest. Durable. Purpose-built.